Jewelry Care
CUFF CAre:
Cuffs can be gently cleaned with a soft toothbrush and dish soap. 1. Load a soft-bristle toothbrush with a large drop of the soap. 2.Turn on a gentle stream of warm water 2. get the cuff wet 3. Gently move the toothbrush back and fourth in the same direction 4. Rinse the cuff 5. Repeat the process as necessary to remove gunk. 6. To brighten up your cuff, use a silver dip solution or a silver polishing cloth.
Ari O Cuff Bracelets are not made to be “squished”. The cuffs are designed and skill-fully shaped to be in a nice “C” shape. Sqishing will cause warping that can lead to layers of metal pulling apart, stones could pop out and can cause solders to fail.
If the cuff is too large and you want it tighter, the only way to make it tighter is to 1. Hold the edges with your pointer finger and push down with your thumbs( shown in pics below) that way you keep that nice C curve at the top.
Hold cuff like this with your pointer finger. 2. With equal pressure on both thumbs, use medium pressure to press the ends of the metal down a bit. It will not make the cuff rounder, but will pull it closer to your arm.
